Table of Contents
What size pool heater do I need for 15000 gallons of water?
Pools up to 15,000 gallons should look at the AquaPro 77K BTU or higher, and 20,000 gallon above ground pools should look at models like the TropiCal 115K BTU. Pools in very windy or colder areas, or those that don’t use a pool cover should consider installing one size larger.
What size water heater do I need for my pool?
To maintain the temperature, you need about 10 BTUs per hour, per square foot of surface, per degree above the air temperature. That means keeping a pool with a surface area of 300 square feet at 80 °F 60 °F weather would require 60,000 BTU per hour.
How many kw does a pool heater use?
So, how much electricity does a pool heat pump use? About 5 kilowatts per hour per 100,000 BTU heat pump. For a general 100,000 BTU pool heat pump, the power you`ll utilize is approximately 5,000 Watts per hour. Typically, the National average for power stands at 13 cents for every kilowatt-hour.
What size pool heater do I need for a 12×24 pool?
Heat Pump Sizing Chart – Inground Pools
| Pool Size (Feet) | Summer 4 BTU’s | Extended 6 BTU’s |
|---|---|---|
| Up To 10,000 Gallons 12′ x 24′ | 50,000 BTU | 85,000 BTU |
| Up To 15,000 Gallons 14′ x 28′ | 85,000 BTU | 110,000 BTU |
| Up To 20,000 Gallons 16′ x 32′ | 85,000 BTU | 125,000 BTU |
| Up To 25,000 Gallons 18′ x 36′ | 110,000 BTU | 150,000 BTU |
How many BTUs does it take to heat a 15000 gallon pool?
90,000 BTU
Electric heat pumps have BTU ratings in the range of 50,000 to 150,000. Calculating the amount of BTUs required will help you determine the size of the heater for your pool….
| Pool Volume(Gallons) | Heat Output(BTU) |
|---|---|
| 10,000 | 50,000 BTU |
| 15,000 | 90,000 BTU |
| 20,000 | 120,000 BTU |
| 25,000 | 140,000 BTU |
Does pool heater size matter?
Generally speaking, the amount of BTUs required to heat pool water will be the same, no matter the size of the heater. But a larger one will work quicker than a smaller heater, especially if you have a large body of water you’re warming.
How much energy does it take to heat a swimming pool?
Natural gas heaters (also known as NG heaters) use about 1 therm per hour per 100,000 BTU’s. For a typical size 400,000 BTU pool heater, that’s 4 therms per hour. Currently, natural gas runs about $1.50 per therm near Tampa. The average cost to heat a pool for one hour on natural gas is around $ 7.00.
How many BTUs do I need for a 20000 gallon pool?
166,000 Btu
20,000 gallons x 8.3 lbs / gallon = 166,000 lbs of water that needs to be heated. Since it takes one Btu to heat one pound of water by a single degree, we now know that raising this entire 20,000-gallon pool by one degree will require 166,000 Btu of heat energy.
Is a larger pool heater better?
What size pool heater do I need for 20000 gallons?
20,000 gallons x 8.3 lbs / gallon = 166,000 lbs of water that needs to be heated. Since it takes one Btu to heat one pound of water by a single degree, we now know that raising this entire 20,000-gallon pool by one degree will require 166,000 Btu of heat energy.
How much does it cost to put a heater in a pool?
While adding a pool heater requires an upfront investment, it helps you maximize your investment by being able to use your pool for much more of the year. Between setup and operating costs, a pool heater costs between $300 and $5,000, with the average cost around $2,000.
What is the most cost effective pool heater?
Solar pool heaters
Solar pool heaters are the most cost-effective option that uses the sun’s energy to heat your swimming pool water. It uses solar collectors, filter, pump and flows control valve to heat the pool in a way that is very economical. In fact, it pays for itself within 3-5 years and incurs almost negligible operating costs.